Industrial Cladding Applications

Conveyance Conforma Clad can protect your conveyance system from the affects of severe abrasion, erosion and corrosion. Our cloth delivery system enables densely-packed tungsten carbide to be uniformly applied to complex geometries, providing a protective barrier that wears at a uniform and predictable rate.   Common Conforma Clad Conveyance Components:  Pipes Elbows Chutes Diverters Elevator Buckets Fans Pipe Spools Screw Conveyors                                   Features & Benefits Eliminate Blowouts - Our cladding can be applied to the weak links in your conveyance system, eliminating blowouts and product loss. Prevent Lost Product - Undetected blowouts can lead to excessive product loss and require large clean-up efforts. Reduce Maintenance Costs & Downtime - Eliminating blowouts reduces maintenance expenses and unscheduled downtime. Avoid Cross-Contamination - Other wear-protection methods use a cavity, which can retain product and lead to contamination between runs. Conveyance Components Cladding Specifications   Diameter Range Length Range ID Clad 2" - 30" 1/2" - 10" OD Clad 3/4" - 30" 1/2" - 24'                Substrates Cladding can be applied to most carbon steels, stainless steels and alloy steels.   Temperature Continuous operation at temperatures up to 1900 degrees F (1038 degrees C) with nominal performance impact. Able to withsatnd transients in excess of 2000 degree F.   Compatibility Compatible with chemicals commonly found in industrial environments, including hydrochloric acid, sulfuric acid and nitric acid.                 Custom Conveyance Solutions Conforma Clad will work closely with you to develop a wear solution for your specific conveyance system. In addition, our brazed tungsten carbide wear protection can be applied to a variety of industrial components that are affected by abrasion, corrosion and erosion. Our team of application and material engineers is available to evaluate your application and recommend a cost effective solution today.   How to Order For questions, request for quotations, or to place an order, please contact our General Industrial Application Engineering team at 888.289.4590 (toll free) or 812.948.2118.  We will need to following information to process your quotation: Component drawing or the actual component, along with dimensions (length, width, height, OD, ID) Substrate or material type. If a casting is involved, please provide material composition. Type (abrasive, corrosive, erosive) and location of wear Current wear protection Explanation of the application, including operating conditions (temperature, pressure, chemical resistance, flow rates, etc.) Material requirements (hardness, surface finish, tensile strength) Quantity required, including annual unit volumes