Power Generation Cladding Applications

Pumps    Increase the reliability of your pumps with Conforma Clad tungsten carbide cladding. Our pump components last longer and sustain maximum performance levels by maintaining critical component geometries for extended run times.   Common Conforma Clad Pump Components:    Impellers Housings Top & Bottom Plates Shaft Sleeves                     Features & Benefits Increased Productivity - Extended pump life results in fewer equipment shutdowns and component changes, lengthening run-times between maintenance windows. Reliable Pump Performance - Our cloth delivery system enables densely packed tungsten carbide to be uniformly applied to complex geometries, providing a protective barrier that wears at a uniform and predictable rate.   Pump Component Cladding Specifications Substrates  Cladding can be applied to most carbon steels, stainless steels and alloy steels.  Temperature Continuous operation at temperatures up to 1900 degrees F (1038 degrees C) with nominal performance impact. Able to withsatnd transients in excess of 2000 degree F. Compatibility Compatible with chemicals commonly found in coal and fly ash, including hydrochloric acid, hydrogen fluoride and sulfuric acid.                       Custom Pump Solutions Conforma Clad will work closely with you to develop a wear solution for your pumping system. In addition, our brazed tungsten carbide wear protection can be applied to a variety of industrial components that are affected by abrasion, corrosion and erosion. Our team of application and material engineers is available to evaluate your application and recommend a cost effective solution today.   How to Order For questions, request for quotations, or to place an order, please contact our Power Generation Application Engineering team at 888.289.4590 (toll free) or 812.948-2118.   We will need to following information to process your quotation: Component drawing or the actual component, along with dimensions (length, width, height, OD, ID) Substrate or material type. If a casting is involved, please provide material composition. Type (abrasive, corrosive, erosive) and location of wear Current wear protection Explanation of the application, including operating conditions (temperature, pressure, chemical resistance, flow rates, etc.) Material requirements (hardness, surface finish, tensile strength) Quantity required, including annual unit volumes